CK-SL.C Parallel type constant wattage heating element
Description
A CK-SL.C parallel type constant wattage heating element is used for freezing protection or to maintain material temperature in the pipelines, vessels and equipment for exposure to temperatures below 260°C.
Design
Heating elements are sized to the Customer’s specifications. The scope of supply includes a made-to-order heat cable, with wires for terminal connection and end termination, and a properly sized gland. A gland is needed to connect the cable inside the power box while ensuring adequate tightness for hazardous area applications.
P.O. Details
To place a P.O., please select the item number of the heating element from the Marking table that suits your project specification, and specify the jacket material and design length (m). E.g., a P.O. for a CK-SL.C type heating element (fluoropolymer jacketed heat cable, 33 W/m rated output and 30 m design length), should contain the following number: CK-SL.C/33/30-f
General Characteristics
|
Max exposure temperature |
260°С for a fluoropolymer jacket | |
| 204°С for a fluoropolymer jacket (cables -ff) | ||
| 220°С for a silicone jacket | ||
| 80°С for a thermoplastic jacket | ||
|
Supply voltage |
~230 V | |
|
Jacket material |
Fluoropolymer, thermoplastic, silicone | |
|
Conductor / heater wire material |
Cu | |
|
Type of heat cable |
Parallel-type, constant wattage |
|
|
Hazardous area classification |
Hazardous, normal |
|
|
Certificate, Ex protection |
Pursuant to ТР ТС 012/2011, №ТС RU C-RU.НА65.В.00705/20, 1Ex e IIC T6...T2 Gb X, Ex tb IIIC T85°С...T300°С Db X |
|
Marking
| CK-SL.C/8-ff | 8 W/m |
| CK-SL.C/10-t/-s | 10 W/m |
| CK-SL.C/15-ff | 15 W/m |
| CK-SL.C/16-f | 16 W/m |
| CK-SL.C/20-t/-s | 20 W/m |
| CK-SL.C/24-ff | 24 W/m |
| CK-SL.C/25-f | 25 W/m |
| CK-SL.C/30-s | 30 W/m |
| CK-SL.C/33-ff | 33 W/m |
| CK-SL.C/33-f | 33 W/m |
| CK-SL.C/40-s | 40 W/m |
| CK-SL.C/45-f | 45 W/m |